External Wall Insulation – Adhesive Fix
S AND B
EXTERNAL WALLS
PRODUCT
INFORMATION
Around 35% of the energy used to heat and cool a building is lost via its external walls. External wall insulation is one of the quickest and most effective ways to improve energy efficiency, whilst at the same time transforming the external aesthetics of your home.
Expanded polystyrene boards can be incorporated into an external facade system to provide an efficient and cost-effective energy-saving solution. S and B EPS external wall insulation (also referred to as solid wall insulation) is an accepted and affordable way of adding thermal value to the outer face of external walls. Its versatility allows it to be used with a variety of finishes including plastic weatherboarding, cladding, tile hanging and reinforced render systems.
When used on the external face of a masonry wall, S and B external wall insulation maximises the natural thermal capacity of the wall and assists in the reduction of thermal fluctuations. Heating and air conditioning interior rooms consume a vast amount of energy, accounting for approximately 80% of a property’s total energy consumption. As a result, external wall insulation systems offer a highly effective solution to reducing the carbon footprint of a property as well as money expended on climate control.
S and B EPS offer various bespoke grades of polystyrene for thermal wall insulation; including grades such as S and B External Wall Insulation, S and B Lambdatherm® (a graphite-enhanced, low thermal value board), plus EPS 70E and EPS 200E – all containing a polymeric flame retardant additive. Thermal values range from 0.038 down to 0.030 W/mk depending on product and thickness. Selected grades of EPS raw material are also used for external wall applications to reduce any bowing and shrinkage of the EPS.
As well as local authorities and private social landlords having invested heavily in external wall insulation over recent years, there has been a huge surge in private householders taking advantage of this type of technology. This can be thanked in part to government-funded initiatives such as Green Deal and Green Homes Grant.

GRADES
S and B EPS External Walls are available in:
Click on grade to display technical data:
Thermal Conductivity
[k] value W/mk(10°C mean)
0.038
Compress Strength
KPa Min (at 10% compressive strength)
70
Cross Breaking Strength
KPa Min
115
Safe Working Load
Kpa at 1% nominal compression
21
Vapour Diffusion
factor µl
20-40
Thermal Conductivity
[k] value W/mk(10°C mean)
0.036
Compress Strength
KPa Min (at 10% compressive strength)
100
Cross Breaking Strength
KPa Min
150
Safe Working Load
Kpa at 1% nominal compression
45
Vapour Diffusion
factor µl
30-70
Thermal Conductivity
[k] value W/mk(10°C mean)
0.036
Compress Strength
KPa Min (at 10% compressive strength)
120
Cross Breaking Strength
KPa Min
170
Safe Working Load
Kpa at 1% nominal compression
45
Vapour Diffusion
factor µl
30-70
Thermal Conductivity
[k] value W/mk(10°C mean)
0.035
Compress Strength
KPa Min (at 10% compressive strength)
150
Cross Breaking Strength
KPa Min
200
Safe Working Load
Kpa at 1% nominal compression
70
Vapour Diffusion
factor µl
30-70
Thermal Conductivity
[k] value W/mk(10°C mean)
0.034
Compress Strength
KPa Min (at 10% compressive strength)
200
Cross Breaking Strength
KPa Min
250
Safe Working Load
Kpa at 1% nominal compression
90
Vapour Diffusion
factor µl
40-100
Thermal Conductivity
[k] value W/mk(10°C mean)
0.033
Compress Strength
KPa Min (at 10% compressive strength)
250
Cross Breaking Strength
KPa Min
350
Safe Working Load
Kpa at 1% nominal compression
100
Vapour Diffusion
factor µl
40-100
Thermal Conductivity
[k] value W/mk(10°C mean)
0.031
Compress Strength
KPa Min (at 10% compressive strength)
70
Cross Breaking Strength
KPa Min
115
Safe Working Load
Kpa at 1% nominal compression
21
Vapour Diffusion
factor µl
20-40
Thermal Conductivity
[k] value W/mk(10°C mean)
0.030
Compress Strength
KPa Min (at 10% compressive strength)
100
Cross Breaking Strength
KPa Min
150
Safe Working Load
Kpa at 1% nominal compression
45
Vapour Diffusion
factor µl
30-70
RECYCLING
Expanded Polystyrene (EPS) is 100% recyclable and any leftover waste can be disposed of via our ‘Waste Recycling Scheme’. Ask a member of our team for further details.

ADVANTAGES
- Our EPS insulation boards are EWI system designer approved.
- EPS is 98% air and is, therefore, an excellent thermal insulator.
- The closed-cell structure of expanded polystyrene inhibits water absorption leaving it unaffected by the normal range of climatic conditions.
- Faster, more efficient single leaf construction can be used, creating additional internal space with improved thermal performance.
- EPS is lightweight, easy to cut and install.
- S and B EPS is manufactured right here in the UK.
- ETAG 004 compliant
- A+ Green Guide rating
- Expanded polystyrene is 100% recyclable
TECHNICAL INFORMATION
Features | Grades EPS | Lambdatherm® | ||||||
---|---|---|---|---|---|---|---|---|
EPS70E | EPS100E | EPS120E | EPS150E | EPS200E | EPS250E | 70E | ELITE | |
Thermal Conductivity [k] value W/mk (10.C mean) |
0.038 | 0.036 | 0.036 | 0.035 | 0.034 | 0.033 | 0.031 | 0.030 |
Compress Strength kPa Min (at 10% compressivew strengths) |
70 | 100 | 120 | 150 | 200 | 250 | 70 | 100 |
Cross Breaking Strength kPa Min |
115 | 150 | 170 | 200 | 250 | 350 | 115 | 150 |
Safe Working Load kPa at 1% nominal compression |
21 | 45 | 45 | 70 | 90 | 100 | 21 | 45 |
Vapour Diffusion Resistance factor µ1 |
20-40 | 30-70 | 30-70 | 30-70 | 40-100 | 40-100 | 20-40 | 30-70 |
Vapour Permeability omg [pa.h.m] |
0.015 to 0.030 | 0.009 to 0.020 | 0.009 to 0.020 | 0.009 to 0.020 | 0.006 to 0.015 | 0.006 to 0.015 | 0.015 to 0.030 | 0.009 to 0.020 |
COLOUR GUIDE
Identification / colour coding of products manufactured to BSEN 13163 |
||||||||
---|---|---|---|---|---|---|---|---|
EPS 70E |
2 x brown stripes & 1 red stripe |
|||||||
EPS 100E |
1 x black stripe & 1 red stripe |
|||||||
EPS 120E |
2 x green stripes & 1 red stripe |
|||||||
EPS 150E |
1 x yellow stripe & 1 red stripe |
|||||||
EPS 200E |
2 x black stripes & 1 red stripe |
|||||||
EPS 250E |
1 violet stripe & 1 red stripe |
|||||||
EPS 300E |
1 violet stripe & 1 red stripe |
|||||||
EPS 500E |
2 x black stripes & 1 red stripe |
DOWNLOADS
related certificates
S and B EPS NEWSLETTER
STAY CONNECTED
Sign up to receive industry news, new product launches and more.